Kent 26x60 CNC Lathe with Fanuc 0i Control 10HP Servo Motor 230V 3PH
Model KLS-2660N/CNC
Part Number: 6-273-049
Price: $46,595.00
or as little as $978.03/mo
Features
- 10 HP servo drive spindle motor.
- Big 3" plus spindle through hole.
- Rigid FC30 castings with extra ribbing.
- Induction hardened and ground ways.
- Alloy steel gears that are hardened and ground.
- Extra large precision ground ballscrews.
- Spindle speed range 45-1800 RPM
- Auto lube system with metered check valves.
- Full enclosure.
- Fanuc 0i CNC control.
- 8" 3 Jaw Chuck.
- Automatic 4 Position Electric Turret.
- Tailstock.
- Programmable Flood Coolant.
- Hydro approval of electrical system.
Description
Complete with 8" 3-jaw chuck, 4-position programmable electric turret, automatic lubrication system, coolant system, roller jaw steady rest, #5MT tailstock, tubular worklight, full enclosure with sliding front doors as well as side and rear access, front access slide-out chip tray, manual and parts list for lathe, complete operation manual for Fanuc 0i cnc controlSpecifications
| Swing over bed | 26" |
| Swing over cross slide | 16.9" |
| Distance between center | 59" |
| Width of bed | 15" |
| Spindle nose | D1-8 |
| Spindle bore | 4" |
| Spindle taper | M.T. #7 |
| Spindle speeds | 20 - 1,300 RPM |
| Longitudinal travel (Z axis) | 39.4" |
| Cross slide travel (X axis) | 14.4" |
| Rapid traverse speed (Z axis) | 400"/min |
| Rapid traverse speed (X axis) | 320"/min |
| Tailstock quill diameter | 3" |
| Tailstock quill travel | 6" |
| Tailstock taper | M.T. #5 |
| Spindle motor | 10 HP |
| Voltage/Phase | 230V, 3 PH |
| AC servo motor (Z axis) | 1.13 HP |
| AC servo motor (X axis) | 0.6 HP |
| Net weight | 8,910 lbs. |
Shipping Weight: 9,394 lbs.